Industry News

Weida main product booster cables , battery clip, tow rope,ratchet tie down.

« The rapid development of electrical toolsChina wire and cable enterprises attach great importance »

magnet wire and electrical insulating electrical wires

Fast-growing, more and more plastic into our lives. From the initial plastic pots filled with a variety of products now around us. New to the old, so there is a product out there, plastic decomposition has become a major problem, and thus a recycling, plastics recycling industry has emerged.
    
Plastic process in the processing of raw materials must be made of plastic heating, from injection molding, drawing, blown film, extrusion machinery in the processing of grain pumping process, we find that the cost of energy expenditure accounted for a large proportion. The traditional way of mechanical heating current through the resistor booster cable able film by heat generated through barrel to convey to the inside heat to melt plastic, so that caused the following disadvantages:
    
First, a large energy loss because it is outside of the heat into the interior must be a communication, resulting in the middle of a heat loss.
    
Second, deteriorating operating environment, we all know, led to an external heat loss of both hot and Chuan Da, with an ordinary grain machine pumping case, when this machine during work, Suo heat emitted will increase 10 degrees Celsius in the machine Zhoubian above the temperature. Originally the summer temperatures in many places throughout the room will reach 35 degrees Celsius above room temperature is no doubt that time will reach or exceed 45 degrees Celsius.
    
Third, regional power shortages, the current domestic electricity is in short supply, especially in the summer, there are many difficulties because of electricity for 24 hours did not result in the situation of power supply, so the production company to bring a huge impact, have their own power or lockout, if its power is too expensive, but the suspension means the company will cease to exist.
    
Electromagnetic heating is electricity can be converted to magnetic energy, so the heated steel body and heat sensors to the magnetic energy as a heating method. It is a fundamental solution to the electric films, electric ring and so on.
1, energy efficient
Thermal efficiency up to 95% or more, under the same conditions, resistive heating method than the 60-80% energy saving, preheat time 2 / 3.
2, reliable operation
Intelligent multi-loop control system and a comprehensive protection system to ensure long-term safe and reliable operation of equipment.
3, lower costs
Heating part of the structure with cables, heating cable itself will not produce heat, long service life. Avoid resistive heating needs regular maintenance and periodic replacement of heating coil of ills, almost no maintenance costs later.
4, improve the environment
Heating part of the heat dissipation of less surface can be hand-to improve the environmental conditions of the production site.
    
Booster cables usually by crossing a wire or a few groups [each at least 2] made a similar strand rope of cable insulation between each wire, and often twisted around a center into the entire outer Bread has a high degree of wire and cable insulation cover is used for electric power, telecommunications and related materials transport purposes. "Wire" and "cable" and not strictly limits the cable. Usually small number of core products in diameter, simple structure of the product known as the wire, not insulated as bare wires, the other called the cable; conductor cross-sectional area larger (more than 6 mm2) as a large wire, small (less than or equal to 6 mm2) as a small wire, insulated wire, also known as wire cloth.
    
Include bare wire and cable, magnet wire and electrical insulating electrical wires, power cables, communication cables and optical cables. Wire and cable is used for electric power, telecommunications and related materials transport purposes. "Wire" and "cable" is not strict boundaries. Usually small number of core products in diameter, simple structure of the product known as the wire, not insulated as bare wires, the other called the cable; conductor cross-sectional area larger (more than 6 mm2) as a large wire, small (less than or equal to 6 mm2) as a small wire, insulated wire, also known as wire cloth. Include bare wire and cable, magnet wire and electrical insulating electrical wires, power cables, communication cables and optical cables. Cables are power cables, control cables, compensation cables, shielded cables, high temperature cables, computer cables, signal cables, coaxial cables, fire-resistant cables, marine cables, etc.. They are formed by the multi-strand wire, used to connect circuits and electrical appliances.

  • Articles related:

Post comment:

◎welcome to give out your point。

Calendar

Comments

Previous

iande Weida Electrical Appliance Tools Co.Ltd. professionally manufacture booster cables , battery clip, tow rope,ratchet tie down.